NTS-Solingen Premium Qualität Carbon Steel Straight Razor, 5/8 Inch, Walnut Scales, Handmade in Solingen, Germany

0




Buy Now with Best Price



The NTS-Solingen 9500PNW "Premium Qualität" is a 5/8" full hollow ground carbon steel razor with a highly polished mirror finish that's brighter and more uniform than the standards of competing Solingen straight razors. The scales are made of walnut wood which has been treated for increased water resistance. Each piece of walnut is entirely unique in appearance. The blade is handmade, but will be approximately 4.8 millimeters thick, 17.5mm from center of spine grind to edge line, weighing 41 grams, and with an approximate cutting angle of 16°. NTS-Solingen is a small producer and is thus able to spend more time on each razor than larger producers, and they intend for the razor to be ready for shaving after only removing the anti-rust oils and providing a proper stropping session. Supplied in plain plastic pouch and produced entirely in Solingen, Germany.
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
5/8" Width Round Point
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
5/8" Width Round Point
Walnut Wood Handle Treated for Enhanced Water Resistance
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
5/8" Width Round Point
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
5/8" Width Round Point
Walnut Wood Handle Treated for Enhanced Water Resistance
Stamped (Not Laser-Engraved) Tang Maker's Mark
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
5/8" Width Round Point
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
5/8" Width Round Point
Walnut Wood Handle Treated for Enhanced Water Resistance
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
5/8" Width Round Point
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
1.2210 Carbon Steel Razor (DIN 115CrV3), 59-60 HRc Hardness
5/8" Width Round Point
Walnut Wood Handle Treated for Enhanced Water Resistance
Stamped (Not Laser-Engraved) Tang Maker's Mark
Handmade in Solingen, Germany